Step 1: Remove Exciter PCB and change the following components to the new values shown:

 
 

C430 – 68pf 5% Silver-Mica	C447 – 10pf NPO Disk
C433 – 150pf 5% Silver-Mica	C448 – 15pf NPO Disk
C434 – 120pf 5% Silver-Mica	C451 – 4.7pf NPO Disk
C437 – 22pf 5% Silver-Mica	C452 – 7.5pf NPO Disk
C439 – 22pf 5% Silver-Mica	C455 – 3.9pf NPO Disk
C440 – 47pf 5% Silver-Mica	C456 – 4.7pf NPO Disk
C443 – 15pf 5% Silver-Mica	C458 – 1.5pf NPO Disk
C444 – 12pf 5% Silver-Mica	C460 – 75pf 5% Silver-Mica
R429 - 180 ohm 1/2 watt

Step 2: Reinstall Exciter PCB and tune in accordance with Motorola manual. Exciter should produce approximately 100mW.

Comments or submissions for publication can be sent to muldoon@seits.org.